https://docs.duet3d.com/
Help

Revision to CNC Pendant

Ian A-S

== Parts needed ==
-* One wired CNC pendant similar to the illustration above. These are available in 4-axis versions (illustrated) and 6 axis versions (with the axis selector switch having additional position 5 and 6). Either will work.
+[image|2677|align=right]
+
+* One wired CNC pendant similar to the image on the right. These are available in 4-axis versions (illustrated) and 6 axis versions (with the axis selector switch having additional position 5 and 6). Either will work.
* One Arduino Micro or Arduino Pro Micro
* One 10K wire-ended resistor

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes