Skip to main content
/

Site Navigation

Your Account

Choose Language

Help

Revision to CAN connection

David Crocker

* On EXP3HC, set all four address switches off
* On boards having two buttons (e.g. TOOL1LC), power the system up while holding both buttons down
-* On those boards having a reset jumper (e.g. EXP1XD(, fit the jumper and then power up the board
+* On those boards having a reset jumper (e.g. EXP1XD), fit the jumper and then power up the board
The board will reset its address and CAN bus speed to default and request firmware from the main board.

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes