Skip to main content
/

Site Navigation

Your Account

Choose Language

Help

Revision to Bed levelling using multiple independent Z motors

Ian A-S

[[Gcode#Section_M584_Set_drive_mapping|See Gcode wiki]]
+
+== Further reading ==
+
+If you have more than one Z motor, each connected to separate motor driver on the Duet, and each motor has an associated endstop, you can home each motor individually. See [guide|18] for an example.

To undo the changes made by this version, click 'Revert Changes.' This will automatically restore the previous version of this guide.

Revert Changes