G60

Back to the Gcode Dictionary

Supported in firmware 1.21 and later.

Usage

• G60 Snn

Parameters

• Snn <nn> specifies memory slot # (0-based) to save into (default 0)

RepRapFirmware for Duets generally provides slots 0 thru 5. When a print is paused the coordinates are saved to slot 1 automatically, and at the start of a tool change the coordinates are saved to slot 2 automatically. The remaining slots are free to use for any purpose. Use G0 or G1 with the appropriate R parameter to move the current tool to a saved position.