Duet 3 will allow the RPM of multiple fans to be read. It’s possible that we may add this facility to Duet 2 as well, because Duet 2 and 3 will share most of the firmware source code.
It’s a Smart IR probe.
See the wiki page on connecting and configuring a. Z probe.
Thanks, I’ve corrected ‘adjust’->’alter’.
If you are homing using a Z-min endstop switch, then you probably have a G92 Z command after the G1 S1 command. That G92 command will override the Z min homing position set by M208.
The BLTouch produces only a short pulse when it triggers, so the reading may change to 1000 too briefly to see in Duet Web Control. But if you test it several times, you should see it read 1000 sometimes.
Your Z homing file is incorrect. Please see Configuring RepRapFirmware for a Cartesian printer.
Duet Web Control is maintained by Christian Hammacher. Your best bet for getting in touch with him is by raising an issue on the Github repository for DWC at https://github.com/chrishamm/DuetWebCont..., or through the Duet Web Control Wishlist section of the forum.
The interface on the GCode Files, Macros and System Editor pages has changed. You now need to right-click on the filename to get the other options such as editing, renaming and deleting.
Please ask this question on the forum.
Page 1 of 2