Help
Rob Schneider
@rschneider
Rob Schneider
| 1 | Reputation |
| 0 | Guides |
| Member Since 12/10/2019 | |
WARNING! From February 2022, these pages are no longer maintained.
Please see the current Duet3D documentation at https://docs.duet3d.com/
Please see the current Duet3D documentation at https://docs.duet3d.com/
My fan0, fan1 and fan2 outputs only drop down to about 0.4 volts when I use the S0 setting
[M106 P1 S0].
I can’t seem to get it close enough to 0VDC, which i need to consistently drive a relay input.
Any ideas?
Are the uncommitted GPIO pins on the Duex5 normally high or normally low on power-up?
Thanks