Looking at it again, It looks like I need to add M581 T0 E1 S1 to the config.g file. I assume at the end? I also assume E1 is extruder 1 end stop connection and S1 indicates the switch is NO. There is no C0 or C1 parameter so I assume it defaults to C0 and can be triggered anytime. If I want to use PS_ON I am not sure what the correct parameter is to substitue for E1 to assign PS_ON to the command. Please let me know if I understand this right and what to use for PS_ON if you know it. Thanks
If I use the PS_ON trigger do I need to connect the stop switch to PS_On and ground? Then, do I need to add the M112 command to Config.g? Does it need other parameters to assign it to the switch? Thanks
Reputation over time
It looks like this user hasn't gained any reputation yet.
Once they have, you'll be able to view a graph of their reputation gained over time.
Here's a preview of what the graph will look like:
Looking at it again, It looks like I need to add M581 T0 E1 S1 to the config.g file. I assume at the end? I also assume E1 is extruder 1 end stop connection and S1 indicates the switch is NO. There is no C0 or C1 parameter so I assume it defaults to C0 and can be triggered anytime. If I want to use PS_ON I am not sure what the correct parameter is to substitue for E1 to assign PS_ON to the command. Please let me know if I understand this right and what to use for PS_ON if you know it. Thanks
If I use the PS_ON trigger do I need to connect the stop switch to PS_On and ground? Then, do I need to add the M112 command to Config.g? Does it need other parameters to assign it to the switch? Thanks