Skip to main content

Site Navigation

Your Account

Choose Language


Step Type:

Drag to rearrange

The bolt hole pattern for the stock Creality Ender board and the Duet Mini 5+ is different. An adapter plate is required.

If the Ender is your only printer, be sure to print the adapter before disassembly.

Attach the adapter mount to the plate using the 4 original screws. Then attach the Maestro to the mount using 4 6mm M3 screws. Use the clear plastic washers that came with the Mini 5+ in the bag of connectors.

Download link for the adapter bracket:

You may notice that this adapter is the same as the Maestro board, because the physical form factor is the same for the Mini 5+.

Your contributions are licensed under the open source Creative Commons license.