After the COM port has been configured, send command "M115" to the Duet board.
The Duet will return the firmware version being used.
If using firmware version 1.19 or later, continue to the next step.
If using firmware version 1.18 or earlier, we recommend upgrading. See installing and upgrading firmware: Upgrading to DuetWiFiFirmware 1.19 here.
Mac Users: you will not see characters appear on the screen as you type. For this reason, it is easiest to copy and paste the commands to ensure correct syntax. Copy M115 and paste into terminal and then hit enter. You will see OK when a succesfull command is received. Wait a few moments and the firmware version will be displayed.
Mac Users: Any double quotation marks must be sent as straight double quotation marks. Curly double quotations will not work. To enable straight double quotation marks go to System Preferences > Keyboard > Text. Then under the Double Quotes drop down, select straight double quotations.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.