Skip to main content
WARNING! From February 2022, these pages are no longer maintained.
Please see the current Duet3D documentation at
Editing Step 14 —

Step Type:

Drag to rearrange

Congratulations - you are now connected to your Duet! You may continue to 2.) Wiring your Duet.

This guide assumes that you connect your Duet via WiFi or Ethernet to your network router, to make it accessible to your network. This may be impractical for your setup, so the Duet offers alternative connection methods:

The Duet 2 WiFi and Duet 3 Mini 5+ WiFi offer an "Access Point" mode that allows a direct WiFi connection to the Duet. See M589 and M552 in the Gcode dictionary.

The Duet 2 Ethernet, Duet 2 Maestro, Duet 3 MB6HC and Duet 3 Mini 5+ Ethernet can be configured to connect directly to an available ethernet port on your PC. See this thread on the forum for details.

A guide to these alternative network setups is available here: Setting up networking on Duet.

Your contributions are licensed under the open source Creative Commons license.