https://docs.duet3d.com/
Help
Editing Step 18 —

Step Type:

Drag to rearrange

The BLTouch has 5 wires which need to be extended to the Maestro board.

You'll need 5 lengths of wire approximately 1 meter in length. You'll need some Dupont connectors and crimps, a crimper, wire stripper, and wire cutter. You'll also need the 5 pin Molex plug connector from the Duet Maestro package for the Z probe port.

A length of nylon loom can help protect the wires and match the look of the stock hotend wiring loom.

In our loom we will include an additional 2 lengths of wire to be used for a small LED strip. These two wires will be piggybacked onto the 2 wires from the LED strip used for the top frame.

Your contributions are licensed under the open source Creative Commons license.