If you included the set of menu files on the SD card as described in the previous guide the LCD menu and encoder wheel should be working already, and you can test the LCD menu to perform the same homing, heating, and movement commands.
If the display shows “Duet Maestro Self-Test” it means you are missing a menu system. You’ll need to either download an existing menu setup, or create your own. Duet 2 Maestro 12864 display menu system
If the LCD is blank, you may need to enable it in config.g by adding M918 P1. If that doesn't work, double check the 10-way ribbon cables are connected correctly and that you flipped the connector housings on the LCD panel side.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.