Command the bed temp to 50c.
Watch the temp graph to see if it stabilizes.
Test the part cooling blower with the fan speed slider on the right side of the screen. Note if it has an effect on the hot end temperature.
As the hot end temp drops below 45c the hot end fan should turn off and the case fan should continue to spin.
Turn the bed heater off (0c).
When the bed temp drops below 45c the case fan should stop spinning.
If you encounter a heater fault, check this page: Spurious heater faults and how to avoid them
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.