The next step is to connect to the Maestro via USB and terminal software like Printrun.
Download and install Printrun: https://www.pronterface.com/#download
Connect a micro USB cable between your PC and the Duet.
Launch Printrun, select the port, and click connect.
Send M115 to get the current version of installed firmware and verify that the board is responding.
Send M997 S0 to update the firmware.
The board will reboot after installing the firmware. Wait a minute and reconnect.
Next send M552 to get the currently assigned DHCP IP address and write it down.
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.