The power supply leads and the bed heater will use the blue spade terminals. You will need a suitable crimper tool for these as well.
Note the polarity. Black (-) and red (+). Check for silkscreen markings on the PCB near the connectors. Or Check the wiring diagram.
You will need to bend the spade terminals up a bit to fit into the case as we will see during reassembly.
Further information on power supplies and bed heaters can be found here on the wiki.
Choosing and connecting a bed heater
Choosing the power supply
Duet 2 Maestro Wiring Diagram
Your contributions are licensed under the open source Creative Commons license.
Insert a new line below
Insert a new line above
Indent current line
Unindent current line
Delete current line
Navigate to next step.
Navigate to previous step.