Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 6 —

Step Type:

Drag to rearrange

Next, we will re-terminate the wires using the provided crimp connectors. How you connect the wires to the board is up to you, but in this case, we will be snipping off the existing connector, stripping the ends, and re-crimping a new connector that fits the Maestro specifically.

The only exception is the motor plugs, which we will modify slightly so they can plug into the Maestro as is. Pay close attention to the orientation of the Creality plugs and the markings on the Creality board in order to preserve polarity of the connectors.

Take out and sort the connector ends that came with the Maestro. You’ll need a crimping tool.

It can also be helpful to use the wiring diagram found here to help guide you.

Your contributions are licensed under the open source Creative Commons license.