Skip to main content

Site Navigation

Your Account

Choose Language

Help

Step Type:

Drag to rearrange

Creality has secured the plugs with a blob of hot glue as strain relief, which is nice, but kind of a pain in our case. Carefully use a small flat blade screw driver to pry the glue blob off the connector. In my case the glue wasn’t very strong and the connector came loose with a little prying.

Before unplugging the connectors, make sure they are properly labeled and maybe take a picture to help identify where everything goes again for reassembly or if you ever wanted to revert back to the stock setup.

Your contributions are licensed under the open source Creative Commons license.