Skip to main content

Site Navigation

Your Account

Choose Language

Help
Editing Step 13 —

Step Type:

Drag to rearrange

Before conducting this step, temporarily alow axis movement without homing by navigating to the G Code console and entering: M564 S0 H0

Navigate back to the Machine Control page. At this time, we will check the operation of our stepper motors.

Move each stepper motor, individually, 1 mm in each direction. If any motors are incorrect, we will fix them in the next step.

Note that a stepper can't be moved before homing. unless the M564 command is used to override this safety default.

If your motor moves in the correct direction, you may home the axis at this time.

Important: Be sure that you have confirmed the correct operation of your endstops before homing.

Your contributions are licensed under the open source Creative Commons license.