Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #5

Edit by Tony

Edit approved by Tony

Deleted
Added
Unchanged

Step Lines

[title] Erase/Reset ButtonsReset button and erase button/jumper
[* blackorange] We'll start at the erase/reset buttonsreset button, and work our way around the wiring diagram clockwise.
[* icon_note] The reset button reboots the board, this is OK to press if a reboot is needed.

[* black] The firmware is erased in one of two ways depending on the hardware PCB revision:
[* green] For revisions v1.04 and later it is a jumper which is bridged to
erase buttonthe firmware.
[* yellow] For all versions prior to v1.04 it is through an erase switch.
[* icon_note] The erase jumper/button
will erase the firmware that is stored on the main processor. The SD card does not hold the firmware, just some configuration files.
[* icon_caution] Do not press the erase button unless you know what you are doing, thedoing. There firmware does not need to be erased for normal upgrading. The process of reinstalling the firmware can be tricky.
[* black] The reset button just reboots the board, this
after it is OK to press if a rebooterased is neededdetailed [[Installing and Updating Firmware#Section_Fallback_procedure_Num_3|In fallback procedure #3]].
[title] Erase/Reset ButtonsReset button and erase button/jumper
[* blackorange] We'll start at the erase/reset buttonsreset button, and work our way around the wiring diagram clockwise.
[* icon_note] The reset button reboots the board, this is OK to press if a reboot is needed.

[* black] The firmware is erased in one of two ways depending on the hardware PCB revision:
[* green] For revisions v1.04 and later it is a jumper which is bridged to
erase buttonthe firmware.
[* yellow] For all versions prior to v1.04 it is through an erase switch.
[* icon_note] The erase jumper/button
will erase the firmware that is stored on the main processor. The SD card does not hold the firmware, just some configuration files.
[* icon_caution] Do not press the erase button unless you know what you are doing, thedoing. There firmware does not need to be erased for normal upgrading. The process of reinstalling the firmware can be tricky.
[* black] The reset button just reboots the board, this
after it is OK to press if a rebooterased is neededdetailed [[Installing and Updating Firmware#Section_Fallback_procedure_Num_3|In fallback procedure #3]].

Image 1

Old Version

New Version

Image 2

No previous image

Added

Image 3

No previous image

Added