Changes to Step #8

Edit by Jason Znack

Edit approved by Jason Znack


Step Lines

+[title] Heaters Tab
+[* black] The Heaters Tab defines the bed and tool heaters, and sets the parameters of the thermistors.
+[* black] Change the bed heater control method to PID.
+[* black] Set the bed temp limit to 80c (limit for the magnetic bed surface)
+[* black] Set the Nozzle temp limit to 250c (limit for the PTFE tube in the hotend)
+[* black] Set the values for both Thermistor values as: R25 – 98801, B – 4185, C - 0
+[* black] Those values are accurate for the stock Ender 3 thermistors provided by Creality. If you have a different aftermarket thermistor, you'll need to get the values from the manufacturer, or derive them manually. Generally though, R25 = 100000 and B = 3950 is fine for a generic NTC 100k 3950 thermistor.