Skip to main content
/

Site Navigation

Your Account

Choose Language

Changes to Step #8

Edit by Ian A-S

Edit approved by Ian A-S

Before
After
Unchanged

Step Lines

[title] Enable Network Module
[* black] First, check the status of the Wifi or Ethernet Module by sending command "M552" to Duet.
[* black] IfFor Duet returns Wifi or Ethernet2 Wifi, it may respond that the WiFi module is disabled, putidle or running. Put it into idle mode it by sending command "M552 S0". If it returns Wifi or'''M552 S0'''. Send '''M552''' again to check it's in idle, then proceed to the next step.
[* black] For Duet 2
Ethernet and Maestro, it may report that the module is idle,disabled or enabled. Put it into disabled mode by sending command '''M552 S0'''. Send '''M552''' again to check it is diabled, then proceed to the next step.
[* black] IfFor Duet returns Wifi or Ethernet2 Wifi, it may respond that the WiFi module is disabled, putidle or running. Put it into idle mode it by sending command "M552 S0". If it returns Wifi or'''M552 S0'''. Send '''M552''' again to check it's in idle, then proceed to the next step.
[* black] For Duet 2
Ethernet and Maestro, it may report that the module is idle,disabled or enabled. Put it into disabled mode by sending command '''M552 S0'''. Send '''M552''' again to check it is diabled, then proceed to the next step.