1.) Getting Connected to your Duet Step #7 History

Changes to Step #7

Edit by Ian A-S — Nov 7, 2019

Edit approved by Ian A-S

	[title] Check your Firmware Version
	[* blue] Windows users:
	[* red] After the COM port has been configured, send command "M115" to the Duet board.
	[* yellow] The Duet will return the firmware version being used.
	[* black] If using firmware version 1.19 or later, continue to the next step.
	[* black] If using firmware version 1.18 or earlier, we recommend upgrading. See [[Installing and Updating Firmware#Section_Upgrading_to_DuetWiFiFirmware_1_Num_19\|installing and upgrading firmware: Upgrading to DuetWiFiFirmware 1.19 here]].
	[* blue] Mac Users: you will not see characters appear on the screen as you type. For this reason, it is easiest to copy and paste the commands to ensure correct syntax. Copy *M115* and paste into terminal and then hit enter. You will see OK when a succesfull command is received. Wait a few moments and the firmware version will be displayed.
-	[* icon_caution] Mac Users: Any double quotation marks must be sent as straight double quotation marks. Curly double quotations will not work. To enable straight double quotation marks go to System Preferences > Keyboard > Text. Then under the Double Quotes drop down, select straight double quotations.
+	[* icon_caution] *Mac Users*: Any double quotation marks must be sent as straight double quotation marks. Curly double quotations will not work. To enable straight double quotation marks go to System Preferences > Keyboard > Text. Then under the Double Quotes drop down, select straight double quotations.