Changes to Step #7
Edit by Filastruder —
Edit approved by Filastruder
- Before
- After
- Unchanged
Step Lines
| [title] Check your Firmware Version (WiFi) |
| [* red] After the COM port has been configured, send command "M115" to the Duet board. |
| [* red] After the COM port has been configured, send command "M115" to the Duet board. |
| [* yellow] The Duet will return the firmware version being used. |
| [* black] If using firmware version 1.19 or later, continue to the next step. |
| [* black] If using firmware version 1.18 or earlier, skip to step ## |