Skip to main content
WARNING! From February 2022, these pages are no longer maintained.
Please see the current Duet3D documentation at

Site Navigation

Your Account

Choose Language

Changes to Step #7

Edit by Filastruder

Edit approved by Filastruder


Step Lines

[title] Check your Firmware Version
-[* black] Open YAT, and configure the correct COM port.
- [* black] If unsure, press ***Windows Key + R*** on your keyboard and type ++devmgmt.msc++
- [* black] Your Duet will be listed under ++Ports (COM & LPT)++ as ++USB Serial Device (COM#)++ or similar. Use COM# as the com port in YAT.
[* red] After COM port has been configured, send command "M115" to the Duet board.
[* yellow] The Duet will return the firmware version being used.
[* black] If using firmware version 1.19 or later, continue to the next step.
[* black] If using firmware version 1.18 or earlier, skip to step ##