WARNING! From February 2022, these pages are no longer maintained.
Please see the current Duet3D documentation at https://docs.duet3d.com/
/

Site Navigation

Your Account

Choose Language

Changes to Step #7

Edit by Tony —

Edit approved by Tony

Before
After
Unchanged

Step Lines

[title] Check your Firmware Version
[* red] After the COM port has been configured, send command "M115" to the Duet board.
[* yellow] The Duet will return the firmware version being used.
[* black] If using firmware version 1.19 or later, continue to the next step.
-[* black] If using firmware version 1.18 or earlier, we recommend upgrading. See details [https://www.duet3d.com/wiki/Upgrading_to_DuetWiFiFirmware_1.19|here].
+[* black] If using firmware version 1.18 or earlier, we recommend upgrading. See [[Installing and Updating Firmware#Section_Upgrading_to_DuetWiFiFirmware_1_Num_19|installing and upgrading firmware: Upgrading to DuetWiFiFirmware 1.19 here]].