Skip to main content
WARNING! From February 2022, these pages are no longer maintained.
Please see the current Duet3D documentation at https://docs.duet3d.com/

Changes to Step #7

Edit by Filastruder

Edit approved by Filastruder

Before
After
Unchanged

Step Lines

+[title] Check your Firmware Version (WiFi)
+[* red] After the COM port has been configured, send command "M115" to the Duet board.
+[* yellow] The Duet will return the firmware version being used.
+[* black] If using firmware version 1.19 or later, continue to the next step.
+[* black] If using firmware version 1.18 or earlier, skip to step ##

Image 1

No previous image

Added