WARNING! From February 2022, these pages are no longer maintained.
Please see the current Duet3D documentation at https://docs.duet3d.com/
/

Site Navigation

Your Account

Choose Language

Changes to Step #4

Edit by Ian A-S —

Edit approved by Ian A-S

Before
After
Unchanged

Step Lines

[title] Connect YAT to Your Printer
-[* black] Windows Users: Open YAT, and configure the correct COM port.
+[* blue] Windows Users: Open YAT, and configure the correct COM port.
[* black] If unsure of the COM port number, press ***Windows Key + R*** on your keyboard and type ++devmgmt.msc++
[* black] Your Duet will be listed under ++Ports (COM & LPT)++ as ++USB Serial Device (COM#)++ or similar. Use COM# as the com port in YAT.
[* black] Also in YAT, under Text Settings set the end-of-line sequence to <LF>.
-[* icon_note] Mac users can skip this step.
+[* blue] Mac users can skip this step.