Changes to Step #4
Edit by David Crocker —
Edit approved by David Crocker
- Before
- After
- Unchanged
Step Lines
[title] Connect YAT to Your Printer |
[* black] Windows Users: Open YAT, and configure the correct COM port. |
[* black] If |
[* black] If |
[* black] Your Duet will be listed under ++Ports (COM & LPT)++ as ++USB Serial Device (COM#)++ or similar. Use COM# as the com port in YAT. |
[* black] Also in YAT, under Text Settings set the end-of-line sequence to <LF>. |
[* icon_note] Mac users can skip this step. |