Changes to Step #3
Edit by Eric Santiago —
Edit approved by Eric Santiago
- Before
- After
- Unchanged
Step Lines
[title] Download YAT Terminal Emulator | |
[* icon_note] To set up a network (WiFi or Ethernet) connection, we must use a terminal emulation program. This is because 3D printer host programs send all characters in uppercase, and your WiFi settings (SSID and password ) are case sensitive. | |
- | [* black] [https://sourceforge.net/projects/y-a-terminal/|Download YAT here.] |
- | [* black] Install YAT using default options. |
+ | [* black] Windows users: [https://sourceforge.net/projects/y-a-terminal/|Download YAT here.] Install YAT using default options. |
+ | [* black] Mac OSX Users: Open Applications > Utilities > Terminal . |
+ | [* black] Run ''ls /dev/tty.*'' |
+ | [* black] Copy the result that has USB in the name. For example; ''/dev/tty.usbmodem1411'' |
+ | [* black] Run ''screen /dev/tty.usbmodem1411 9600''. Replace "usbmodem1411" with the result you received. You should see a blank screen. Hit enter and you should see OK returned. You are connected successfully. |
+ | [* icon_caution] If you get an error, ''Sorry, could not find a PTY.'' unplug the USB, plug it back in and try again. |