Skip to main content
WARNING! From February 2022, these pages are no longer maintained.
Please see the current Duet3D documentation at

Site Navigation

Your Account

Choose Language

Changes to Step #2

Edit by Tony

Edit approved by Tony


Step Lines

[title] Connect to your Duet via USB
[* black] If you are using a Windows computer, [|download the USB drivers for Duet here].
[* black] Connect the Duet to your PC with the USB cable provided.
[* black] To install drivers, open control panel by pressing ***Windows Key + R*** and typing ***devmgmnt.msc***
[* black] Look for any devices with a yellow triangle which would indicate that the driver is not installed. If no devices have this indicator, then the driver was successfully installed.
[* black] Right click on the USB device with a yellow triangle.
[* black] Click Install Driver and browse to the location of the driver that was downloaded at the beginning of this step. Continue setup by clicking "Next" until the device driver has been installed.
-[* black] If you purchased a ***Duet Ethernet***, skip to step ##.
+[* black] If you purchased a ***Duet Ethernet***, skip to [guide|7|step 8|stepid=19].
[* black] If you purchased a ***Duet Wifi***, continue to step 3.