Skip to main content
WARNING! From February 2022, these pages are no longer maintained.
Please see the current Duet3D documentation at

Site Navigation

Your Account

Choose Language

Changes to Step #2

Edit by Eric Santiago

Edit approved by Eric Santiago


Step Lines

[title] Connect to your Duet via USB
[* black] If you are using a Windows computer, [|download the USB drivers for Duet here].
[* black] Connect the Duet to your PC with the USB cable provided. No other power connection is required at this stage.
[* black] To install drivers, open device manager by pressing ***Windows Key + R*** and type ***devmgmt.msc***
[* black] Look for any devices with a yellow triangle which would indicate that the driver is not installed. If no devices have this indicator, then the driver was successfully installed.
[* black] Right click on the USB device with a yellow triangle.
[* black] Click Install Driver and browse to the location of the driver that was downloaded at the beginning of this step. Continue setup by clicking "Next" until the device driver has been installed.
+[* icon_note] Mac OSX users can just connect the Duet board to their Mac with the provided USB and proceed to the next step.