Skip to main content
WARNING! From February 2022, these pages are no longer maintained.
Please see the current Duet3D documentation at

Site Navigation

Your Account

Choose Language

Changes to Step #12

Edit by Stuart Wimbush

Edit approved by Stuart Wimbush


Step Lines

[title] Ensure Future Connectivity
[* black] We need to be sure the networking is configured properly for the future.
-[* red] Navigate to config.g by clicking:
+[* black] Navigate to config.g by clicking:
+ [* red] Settings
[* orange] System Editor
[* yellow] config.g
[* black] Check that there is a command "M552 S1" without a semicolon in the beginning. This sets the wifi or ethernet module to enabled.
[* icon_note] Commands are processed from top to bottom, so a command at the bottom supersedes a command at the top of the file.