Changes to Step #10
Step Lines
| [title] Ensure Future Connectivity |
| [* black] We need to be sure the networking is configured properly for the future. |
| [* red] Navigate to config.g by clicking: |
| [* orange] System Editor |
| [* yellow] config.g |
| [* black] Check that there is a command "M552 S1" without a semicolon in the beginning. This sets the wifi or ethernet module to enabled. |
| [* icon_note] Commands are processed from top to bottom, so a command at the bottom supersedes a command at the top of the file. |
Image 1
No previous image
Added
Image 2
No previous image
Added