Skip to main content
WARNING! From February 2022, these pages are no longer maintained.
Please see the current Duet3D documentation at

Changes to Step #13

Edit by Filastruder

Edit approved by Filastruder


Step Lines

+[title] Set a static IP for Duet Ethernet
[* black] Optional: Set the IP address for the Duet controller in the M552 command.
[* icon_note] Leaving this as will allow your router to assign an IP address via DHCP. This is standard for most network devices.
[* icon_caution] If you are not familiar with networking, you should leave this setting as