Changes to Step #13
Edit by Filastruder —
Edit approved by Filastruder
- Before
- After
- Unchanged
Step Lines
[* black] Optional: Set the IP address for the Duet controller in the M552 command. |
[* icon_note] Leaving this as 0.0.0.0 will allow your router to assign an IP address via DHCP. This is standard for most network devices. [* icon_caution] If you are not familiar with networking, you should leave this setting as 0.0.0.0. |
[* icon_note] Leaving this as 0.0.0.0 will allow your router to assign an IP address via DHCP. This is standard for most network devices. [* icon_caution] If you are not familiar with networking, you should leave this setting as 0.0.0.0. |