Skip to main content
WARNING! From February 2022, these pages are no longer maintained.
Please see the current Duet3D documentation at

Site Navigation

Your Account

Choose Language

Changes to Step #10

Edit by Eric Santiago

Edit approved by Eric Santiago


Step Lines

[title] Duet Ethernet - Enable Ethernet Connection
-[* black] Using YAT, send the command "M552 S1" to the board.
+[* black] Send the command "M552 S1" to the board.
[* black] After about 30 seconds, the board should reply with ***Network running*** and the IP address that the Duet has been assigned.
+[* icon_note] Mac users: Press CRTL-A and then CRTL-D to exit screen and return to terminal. You can safely close Terminal at this point.