Changes to this Step
Edit by Filastruder —
Edit approved by Filastruder
- Before
- After
- Unchanged
Step Lines
- | [title] Continuing from step 3 - Transfer SD Card to a PC (Ethernet Only) |
---|---|
+ | [title] (Delete?) Continuing from step 3 - Transfer SD Card to a PC (Ethernet Only) |
[* black] Remove the SD card from the Duet Ethernet and transfer it to a PC. | |
[* black] If you don't have an SD card reader on your computer, you should be able to get networking up and running anyway by sending the relevant g-code over a terminal emulator or host software (like Simplify3D, Repetier Host, or Cura) | |
[* black] Sending "M552 P0.0.0.0 S1" should bring networking up with a DHCP based IP address. |