Changes to this Step
Step Lines
[title] Transfer SD Card to a PC (Ethernet) |
[* black] Remove the SD card from the Duet Ethernet and transfer it to a PC. |
[* black] If you don't have an SD card reader on your computer, you should be able to get networking up and running anyway by sending the relevant g-code over a terminal emulator or host software (like Simplify3D, Repetier Host, or Cura) |
[* black] Sending "M552 P0.0.0.0 S1" should bring networking up with a DHCP based IP address. |
Image 1
No previous image
Added