Skip to main content
WARNING! From February 2022, these pages are no longer maintained.
Please see the current Duet3D documentation at

Site Navigation

Your Account

Choose Language

Changes to Step #9

Edit by Tony

Edit approved by Tony


Step Lines

[title] Connect Duet to WiFi
[* black] Using YAT, send command M587 S"your-network-ssid" P"your-network-password"
[* black] Send command "M551 S1" to connect to WiFi.
[* red] After a moment, Duet will confirm the connection and the IP address of the Duet controller.
-[* black] [guide|7|Continue to Step 11.|stepid=11]
+[* black] At this point your Duet Wifi should be on the wifi network. To connect to it, [guide|7|continue to Step 11.|stepid=11]