Changes to Step #9
Edit by David Crocker —
Edit approved by David Crocker
- Before
- After
- Unchanged
Step Lines
[title] Duet Wifi - Connect Duet to Network | |
[* black] Send command ***M587 S"''your-network-ssid''" P"''your-network-password''"***. The quotation marks are needed, but substitute the SSID and WiFi password for your own network. | |
[* black] Important: enter the ***exact*** characters in the SSID and password of your network, in the correct case, ***except*** that if your SSID contains an apostrophe then enter two apostrophe characters in its place. For example, if your SSID is ***Pete's network*** then enter "Pete''s network". | |
- | [* black] Send command ***M552 S1*** to connect to WiFi. (Make sure to connect 2. |
+ | [* black] Send command ***M552 S1*** to connect to WiFi. (Make sure to connect 2.4GHz network , 5.0GHz network will not connect with the Duet) |
[* red] After a moment, Duet will confirm the connection and the IP address of the Duet controller. | |
[* black] At this point your Duet Wifi should be on the wifi network. To connect to it, [guide|7|continue to Step 9.|stepid=11] | |
[* icon_note] Note: The WiFi module only support 2.4Ghz not 5 Ghz Wifi bands. |