WARNING! From February 2022, these pages are no longer maintained.
Please see the current Duet3D documentation at https://docs.duet3d.com/
/

Site Navigation

Your Account

Choose Language

Changes to Step #9

Edit by Eric Santiago —

Edit approved by Eric Santiago

Before
After
Unchanged

Step Lines

[title] Duet Wifi - Connect Duet to Network
-[* black] Using YAT, send command M587 S"your-network-ssid" P"your-network-password"
+[* black] Send command M587 S"your-network-ssid" P"your-network-password"
[* black] Send command "M552 S1" to connect to WiFi.
[* red] After a moment, Duet will confirm the connection and the IP address of the Duet controller.
[* black] At this point your Duet Wifi should be on the wifi network. To connect to it, [guide|7|continue to Step 11.|stepid=11]