https://docs.duet3d.com/

Changes to Step #8

Edit by Jason Znack

Edit approved by Jason Znack

Before
After
Unchanged

Step Lines

+[title] Testing the Bed Heater
+[* black] Command the bed temp to 50c.
+[* black] Watch the temp graph to see if it stabilizes.
+[* black] As the hot end temp drops below 45c the hot end fan should turn off and the case fan should continue to spin.
+[* black] Turn the bed heater off (0c).
+[* black] When the bed temp drops below 45c the case fan should stop spinning.
+[* black] If you encounter a heater fault, check this page: [[Spurious heater faults and how to avoid them]]

Image 1

No previous image

Added