Skip to main content
WARNING! From February 2022, these pages are no longer maintained.
Please see the current Duet3D documentation at https://docs.duet3d.com/

Changes to Step #5

Edit by Jason Znack

Edit approved by Jason Znack

Before
After
Unchanged

Step Lines

+[title] Testing Homing Behaviour
+[* black] Now that we have verified that the motors are moving in the right direction and the end stops are triggering correctly, we can try our first homing commands.
+[* black] On the Machine Control tab, click the Home buttons for each axis, starting with X.
+[* black] ***Warning! If the direction of movement is not towards the end stop, kill the power to the printer immediately.***
+[* black] When the printer starts to move, immediately press the endstop switch for the axis with your finger.
+[* black] ***Warning! If the movement does not stop when you trigger the end stop, kill the power to the printer immediately.***
+[* black] When homing X the print head should move to the left towards the end stop switch.
+[* black] When homing Y the bed should move to the back towards the end stop switch.
+[* black] When homing Z the gantry should move down towards the end stop switch.

Image 1

No previous image

Added