Skip to main content
WARNING! From February 2022, these pages are no longer maintained.
Please see the current Duet3D documentation at

Changes to Step #3

Edit by Jason Znack

Edit approved by Jason Znack


Step Lines

+[title] Testing End Stop Switches
+[* black] Next, we will verify that the end stops are triggering properly.
+[* black] Go to the Settings > Machine properties > find the column that shows End stop hit.
+[* black] X, Y, and Z end stops should say "No", E should say "Yes"
+[* black] Manually trigger the end stops with your finger, you should see the value change to "Yes" for each one you press.
+[* black] If the values do not change, power down the printer and double check your wiring connections.
+[* black] If the values for X, Y, and Z show "Yes" by default, and "No" when triggered, you chose the wrong switch type in the configurator.

Image 1

No previous image