Skip to main content
WARNING! From February 2022, these pages are no longer maintained.
Please see the current Duet3D documentation at https://docs.duet3d.com/

Changes to Step #18

Edit by Jason Znack

Edit approved by Jason Znack

Before
After
Unchanged

Step Lines

+[title] USB Terminal Connection
+[* black] The next step is to connect to the Maestro via USB and terminal software like Printrun.
+[* black] Download and install Printrun: https://www.pronterface.com/#download
+[* black] Connect a micro USB cable between your PC and the Duet.
+[* black] Launch Printrun, select the port, and click connect.
+[* black] Send M115 to get the current version of installed firmware and verify that the board is responding.
+[* black] Send M997 S0 to update the firmware.
+[* black] The board will reboot after installing the firmware. Wait a minute and reconnect.
+[* black] Next send M552 to get the currently assigned DHCP IP address and write it down.

Image 1

No previous image

Added