Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #6

Edit by Jason Znack

Edit approved by Jason Znack

Deleted
Added
Unchanged

Step Lines

[title] Re-Crimping the Connectors
[* black] Next, we will re-terminate the wires using the provided crimp connectors. How you connect the wires to the board is up to you, but in this case, we will be snipping off the existing connector, stripping the ends, and re-crimping a new connector that fits the Maestro specifically.
[* black] The only exception is the motor plugs, which we will modify slightly so they can plug into the Maestro as is. Pay close attention to the orientation of the Creality plugs and the markings on the Creality board in order to preserve polarity of the connectors.
[* black] Take out and sort the connector ends that came with the Maestro. You’ll need a crimping tool.
[* black] https://forum.duet3d.com/topic/9852/crimping-tool[https://forum.duet3d.com/topic/9852/crimping-tool|Crimping Tool Thread]
[* black] https://forum.duet3d.com/topic/9852/crimping-tool[https://forum.duet3d.com/topic/9852/crimping-tool|Crimping Tool Thread]
[* black] It can also be helpful to use the wiring diagram found here to help guide you.
[* black] [[Duet 2 Maestro Wiring Diagram]]