Skip to main content

Site Navigation

Your Account

Choose Language

Changes to Step #3

Edit by Jason Znack

Edit approved by Jason Znack


Step Lines

[title] Disconnecting the old electronicsOld Electronics
[title] Disconnecting the old electronicsOld Electronics
[* black] Creality has secured the plugs with a blob of hot glue as strain relief, which is nice, but kind of a pain in our case. Carefully use a small flat blade screw driver to pry the glue blob off the connector. In my case the glue wasn’t very strong and the connector came loose with a little prying.
[* black] Before unplugging the connectors, make sure they are properly labeled and maybe take a picture to help identify where everything goes again for reassembly or if you ever wanted to revert back to the stock setup.