Skip to main content
WARNING! From February 2022, these pages are no longer maintained.
Please see the current Duet3D documentation at https://docs.duet3d.com/

Changes to Ender 3 Pro and Duet Maestro Guide Part 3: Commissioning Introduction

Edit by Jason Znack

Edit approved by Jason Znack

Before
After
Unchanged
Category
Duet 2 Maestro
Type
how-to
Title
Ender 3 Pro and Duet Maestro Commissioning Guide
Introduction
In the previous two guides, we connected all the wiring, and prepared the SD card with all the configuration files needed and connected to the printer.
This guide will cover the first steps you should take once connected to the Duet Web Control to safely verify that your hardware is connected and configured correctly.
Though this guide is specific to the Ender 3, the procedures shown here are the same for any printer during first commissioning.
Time Required Min
30 minutes
Time Required Max
1 hour
Imageid
Before
After
Difficulty
Easy
Author
Public
No
Summary
Converting the stock Creality Ender 3 Pro to use the Duet Maestro. Part 3 - Initial testing of hardware to verify proper configuration.

Flags

  • In Progress added.
  • User-Contributed Guide added.

Steps

Step #: 1
Before
After
Step #: 2
Before
After
Step #: 3
Before
After
Step #: 4
Before
After
Step #: 5
Before
After
Step #: 6
Before
After
Step #: 7
Before
After
Step #: 8
Before
After
Step #: 9
Before
After
Step #: 10
Before
After
Step #: 11
Before
After
Step #: 12
Before
After