Skip to main content
WARNING! From February 2022, these pages are no longer maintained.
Please see the current Duet3D documentation at https://docs.duet3d.com/

Changes to Ender 3 Pro and Duet Maestro Guide Part 2: Configuration Introduction

Edit by Jason Znack

Edit approved by Jason Znack

Before
After
Unchanged
Category
Duet 2 Maestro
Type
how-to
Title
Ender 3 Pro and Duet Maestro Configuration Guide
Introduction
In the previous guide, we mounted the Duet Maestro board inside the Ender 3 and connected all the wires. Before we can use the Duet, we need to provide it with configuration information specific to the printer.
This guide will go through how to obtain the needed information, and how to go through the online configuration tool to generate a set of config files that will work with the Ender 3.
Even though this guide is specific to the Ender 3, the general principles remain the same for other printers, and could be used as a basis for adapting printers.
Time Required Min
1 hour
Time Required Max
2 hours
Imageid
Before
After
Difficulty
Easy
Author
Public
No
Summary
Converting the stock Creality Ender 3 Pro to use the Duet Maestro. Part 2 - Using the RepRapFirmware Web Configurator to generate a config file set.

Parts

  • Ender 3 Pro x1 added.
  • Duet 2 Maestro x1 added.

Flags

  • In Progress added.
  • User-Contributed Guide added.

Steps

Step #: 1
Before
After
Step #: 2
Before
After
Step #: 3
Before
After
Step #: 4
Before
After
Step #: 5
Before
After
Step #: 6
Before
After
Step #: 7
Before
After
Step #: 8
Before
After
Step #: 9
Before
After
Step #: 10
Before
After
Step #: 11
Before
After
Step #: 12
Before
After
Step #: 13
Before
After
Step #: 14
Before
After
Step #: 15
Before
After
Step #: 16
Before
After
Step #: 17
Before
After
Step #: 18
Before
After
Step #: 19
Before
After